Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

This page describes how to update GridOS on existing Grid devices.

Raspberry PI4

  • Requirements

    • At least GridOS v0.8.5 for arm64: https://lexa.blob.core.windows.net/grid-os/gridos.0.8.5.arm64.img.xz. The over-the-air OS update is supported from this version and higher, for RPI4. Lower versions will not have OTA OS update support

    • Latest omg utility. If you hav existing omg utility installed, do omg update , or npm install -g @ombori/ga-cli

  • Instructions

    • flash the minimum required RPI4 (arm64) GridOS version to your SD Card https://lexa.blob.core.windows.net/grid-os/gridos.0.8.5.arm64.img.xz. Checkout in the Device Set-up flow in the Grid Console for the newer versions

    • Set the device agent module to at least v1.5.0 and up, in console <TODO: insert pic below>

    • once the device is online and running, run omg dev stream <devicename> agent update '{version: "0.8.6"}'

    • then omg dev stream <devicename> agent install '{version: "0.8.6"}'

    • finally, reboot the device through console, or through omg - omg dev invoke <device-name> agent reboot


  • No labels